Uncategorized
Steps to clean your PlayStation 5 to prevent overheating and important tips to maintain it
Advertisement
In this article we will address the most common problem that many users of the new generation Sony device suffer from and we would like to share with you to find, collect and simplify the cleaning steps for the PlayStation 5 to preserve it for as long as possible, Especially with the recent price increase.
Despite the technical development witnessed by electronic devices and the discovery of professional solutions in the area of cooling, their first enemy is still the problem of high temperature in the basic parts "processors", as it directly affects their performance and accelerates their exposure to damage over time, and the console's processor chips are one of the most electronic parts that constantly heat up, depending on the many and permanent operations they perform, and the narrow cooling space that prevents air movement, so it is always necessary to avoid high temperatures in your device to maintain its performance and stability.
Sony designed the Playstation 5, putting very simple but intelligent touches on it at the same time, not only the possibility of changing the device's interface, but Sony's innovative layout through intelligent design that facilitates the process of cleaning the device from accumulated dust.
When you disassemble the main interface of the device, you will notice two holes that allow you to vacuum the dust from inside them without having to open the device completely to clean it. Of course, this does not guarantee that the internal components of the device are completely free of dust, but it certainly helps.
First of all, we would like to clarify that this method will be divided into three levels according to the need, which is the level easy and fast In “routine” cleaning, then Intermediate level For those who have little or medium experience in dealing with the dismantling of PlayStation devices, and finally Advanced level It cleans the PlayStation 5 in a detailed and complete manner, and we recommend that the user be highly experienced and knowledgeable to do this.
Easy and fast level.
Tools needed:
- Used toothbrush.
- Dust extraction device, if applicable.
- Dust remover liquid, if available.
- Paper napkins moistened with a little alcohol.
Method:
We unscrew the finished cover of the Playstation 5 as shown in the photo, and make sure that the cover must rotate to the left when placing the piece in this way, and carefully, pressing a little upwards, the cover will move from its place, and follow the same process to remove the other cover from the other side of the device.
As shown in the photos below, the device will look like this from both directions “Photo #1 and Photo #2”, and from this point on you will have to be careful with the device and avoid dropping it, spilling liquid on it or treating it with excessive roughness.

Photo #1

Photo #2
Things are now clear in front of you and you will find in front of you a lot of dust and dirt accumulated in the ventilation holes and on the edges of the device, so you will have to follow the next step.
The figure above shows how you will use a dry and clean brush to remove dust and sand stuck everywhere, and be careful not to let the dust in and always try to remove it and wipe the device everywhere you can reach, except the “internal parts” of course.
Also, make sure that the cover you removed does not have dirt and dust stuck on it and you can clean it with wet or dry wipes.
You can use a small or medium air pump to remove dust and sand trapped in the ventilation ports and easily accessible places on the device's cooling fan.
Then comes one of the most important steps that you must ensure is completed, which is to remove the dust and sand trapped in the two grooves intended for collecting dirt, by means of a vacuum cleaner and dirt collector or something similar, and you can also work hard and use a manual method that you find suitable on your own.
The “dust trap” that Sony designed and talked about when it first reviewed the internals of the device last year, which are two holes where most of the dust, dirt and dust collect to reduce its accumulation in the ventilation areas, heat sink and cooling fan, which is shown in the image below

An important final step is to turn the device over as shown in the image below and use a vacuum cleaner or dry cloths to remove dirt from the USB and HDMI connection ports, the Internet cable port, and the ventilation holes shown in front of you.
Intermediate level.
Here we conclude the quickest and safest way to clean the PlayStation 5, which is used most of the time, and in case the dirt is more than expected and this quick method does not work for it, now you can follow the “medium level” method, which is as follows.
Tools needed:
- Used toothbrush.
- Dust and dirt suction device.
- Dust remover liquid, if available.
- Paper napkins moistened with a little alcohol.
- 10 cm screwdriver.
Method:
First of all, in this method you will have to start using the first method.”Quick and easy levelAnd complete it as shown in the photos above, as the three steps are completely linked to each other, each one being complementary to the other.
Let's delve a little deeper into trying to clean the device, this time removing all the dirt and dust trapped in the cooling fan, and as it is the main factor in maintaining the temperature stability of the internal parts through the "large heatsink" that characterizes the PlayStation 5 and the cooling of the integrated APU CPU.
Therefore, the accumulation of dirt will lead to a slowdown in the fan speed, and neglecting it will lead to the ventilation holes closing over time. The two figures below show the location of the screws and the cable connecting them to the board.

screw places

The location of the electrical connection of the fan
After removing the fan with a screwdriver, use the brush to clean the stuck dirt, try not to put too much pressure on its balance, and avoid using liquids so that they do not leak into the electromagnetic field responsible for its rotation, as shown in the image below.
After finishing cleaning the fan, and through the two photos below, observe carefully how you can find some dust and dirt trapped in those narrow places as shown in the photo next door, which you should clean with a duster or a dry cloth, and in the photo on the left you will see what part of the heatsink looks like, of which you can clean part by means of a dust removal device, very carefully.

Confined spaces around the fan

Heat sink part
Advanced level
Tools needed:
- Used toothbrush.
- “Original” electronics cleaning fluid, preferably “WD-40”
- Dust and dirt suction device.
- Dust remover liquid, if available.
- Paper napkins moistened with a little alcohol.
- 10 cm screwdriver.
After making sure that the previous two steps have been completed, this step will come, which requires a lot of experience to begin with, and will definitely void the warranty of your device, and we do not recommend using this method at all, except in case of necessity, such as high temperature of the device. Continued, despite following the previous steps with decreased performance of the device, and here it is better to go to the maintenance center of the “authorized agent” or to an experienced specialist in the field.
You will have to completely disassemble the PlayStation 5 parts, as you will see in the photos below, and clean each part professionally, individually and with precision, using special tools like the ones we mentioned above, and you can follow the TronicsFix channel on YouTube to watch the method in full.
A set of important tips to prevent your PlayStation 5 from overheating.
- Always make sure that the device is not surrounded by “barriers” such as “wall or cabinet” in all directions, especially in the direction of the air outlet.
- Do not place the device in a confined or restricted location. Do not allow dust to accumulate in or around the ventilation holes of the PS5 system.
- Make sure the ventilation holes on the sides and back of the PS5 are not blocked or obstructed. Make sure there is at least 4 inches of free space on each side of the device.
- Do not place the device on carpets or long-fiber rugs.
- Make sure the wires of the plug and socket are fixed and well connected, and use the original types in the electrical connections, and do not wrap the wires around each other.
- Avoid leaving windows open all night or when you are not in the room, and this especially applies to desert areas which are notorious for sandstorms from time to time.
- Do not leave your PlayStation 5 on for unnecessarily long periods of time and be sure to turn it off when not needed and avoid using sleep mode continuously if you do not need it.
- Make sure the position of the device, whether standing or sitting, is level and stable.
- Not putting the covers completely on, either on the device or above or below the device enclosure. “I hope one of the moms hears me.”
- Make sure the electricity in the appliance room or home is stable and suitable for the appliance's load capacity.
- Always disconnect the PS5 power cord from the back of the console before cleaning it.
Finally, we at VGA4A want to help you and encourage you to clean your device periodically for maintenance purposes, but we are not responsible for disassembling your device incorrectly or using inappropriate tools, and we strongly recommend going to specialists in this area to avoid causing accidents and damage.